A few years ago, I received a Ring video doorbell as a Christmas gift. If you’re not familiar with one of these they are a great simple device that replaces the exterior doorbell on your house. Most exterior doorbells are really just a simple switch, but these devices include a wide-angle video camera, speaker and microphone for two-way conversation with anyone who rings the bell. I have the earlier version 1 which includes a 720p HD camera, but the newer models incorporate a 1080p camera for better resolution. The device couples with your home’s WiFi network, so that you can connect with it on your iPhone. In addition to iOS, Ring supplies application software for Android, Windows and Mac so there should be no problem with compatibility.
In my case, the problem came with my regular WiFi signal not being sufficiently strong to work with the doorbell mounted on the outside of the house near the front door while my WiFi router is in my basement office. Fortunately, I had an old Linksys WRT160 router which I had replaced a few years ago with a Netgear WNDR4000. The Netgear was a significant improvement to the older Linksys which did not support the 5GHz speed. The doorbell only uses the 2.4GHz band so I created a separate network for the doorbell and the living room where the signal from the Netgear was weak.
First Netgear Router
The WNDR4000 was fine with my computer located in the same room as the router, but my wife who has her computer on the third floor would often have poor connectivity on the 5GHz band and occasionally even on the 2.4GHz band. Neither router supported the newer 801.11ac protocol, but we rarely need to transfer large files between computers on different floors. Another drawback with this setup is it left us with 5 networks broadcasting their availability; two from the Netgear WNDR4000 (one for the 2.4 band and one for the 5GHz band), one from the Linksys, one from the Comcast cable modem and one for the xfinitywifi network which Comcast foists on all its subscribers for anyone to use when they visit your home. The main reason for not using the WiFi network on the cable modem is that the bandwidth is substantially inferior. Throughput with the cable modem network in barely 25% of what the bandwidth is when connecting through the Netgear router.Continue reading…